Altium

Design Rule Verification Report

Date:		2025-01-01
Time:		5:29:38 PM
Elapsed Time:		00:00:01
Filename:		D:\Documents\Altium\Projects\Step Motor Controller\PCB1.PcbDoc

Warnings:		0
Rule Violations:		0

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=7.874mil) (All),(All)	0
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Un-Routed Net Constraint ( (All) )	0
Modified Polygon (Allow modified: No), (Allow shelved: No)	0
Width Constraint (Min=10mil) (Max=20mil) (Preferred=10mil) (All)	0
Routing Topology Rule(Topology=Shortest) (All)	0
Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All)	0
Hole Size Constraint (Min=1mil) (Max=100mil) (All)	0
Hole To Hole Clearance (Gap=10mil) (All),(All)	0
Minimum Solder Mask Sliver (Gap=0.039mil) (All),(All)	0
Silk To Solder Mask (Clearance=3.937mil) (IsPad),(All)	0
Silk to Silk (Clearance=10mil) (All),(All)	0
Net Antennae (Tolerance=0mil) (All)	0
Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All)	0
Total	0